Golden Valley Route - A modular MRR layout

Module legs

When it comes to module legs, there are quite a few ways to make them. This is how I make them.

I use 16x33mm strip of wood cut in lengths suitable for the desired total module level.
Two 45mm strips and a 45*100*8mm scrap piece of plywood makes the leg socket.
A 10mm hole in the plywwod resulting in a little 'give' with the 8mm bolts I use
An 8mm T-nut is set into the leg

25mm M8-bolt

To make the legs adjustable in height, they are also set with T-nuts (6mm).